| |
|
Cooling of Superheated Refrigerants Flowing Inside
Mini and Micro
Tubes, Study of Heat Transfer and Pressure Drop,
CO2 Case Study
| Get Access |
X Close
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
A. ALShqirate, M. Hammad
and M. Tarawneh
© 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
199-203 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
Superheated Carbon dioxide gas was subjected to a cooling process. Experimental investigation along with an analytical
study was carried out in this work |
| |
Keywords
Cooling refrigerants; Inside flow; Mini and micro tubes; Heat transfer; Pressure drop; R477
|
|
|
| |
|
A Sharp-Interface Fluid-Structure Interaction
Algorithm for Modeling
Red Blood Cells
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
T. D. AlMomani, S. C. Vigmostad and L. A. Alzube
© 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
193-198 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
RBC deformation is thought to play a major role in both RBC dynamics and functionality. Due to the difficulty of
experiments on real RBCs, researchers tend to perform computational simulations that can cover RBC dynamics and blood
rheology |
| |
Keywords
Red blood cell; Hyperelastic membrane; Jump conditions; Deformation; Capillaries
|
|
|
| |
|
Design Analysis and Modeling of a General Aviation
Aircraft
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
F. H. Darwish,G. M. Atmeh
and Z. F. Hasan
© 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
183-191 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
In the present study, design analysis is performed to accurately estimate the gross take-off weight, define the external
geometry, and size the wings and tail of a general aviation aircraft by using the performance parameters associated with a
pre-defined mission profile and a set of design goals. |
| |
Keywords
Aircraft Design; Flight Simulation; Finite Element Analysis
|
|
|
| |
|
Effect of Direct Extrusion on the Microstructure,
Microhardness,
Surface Roughness and Mechanical Characteristics
of Cu-Zn-Al
Shape Memory Alloy, SMA.
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
S. M. Al-Qawabah © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
175-181 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
Shape memory alloys (SMA) are now widely used in many engineering applications especially in robotic, aerospace and
vibration control area. |
| |
Keywords
Extrusion; Microstructure; Microhardness; Cu-Zn-Al shape memory alloy; Mechanical behavior; Surface roughness
|
|
|
| |
|
Costing of the Production and Delivery of
Ready-Mix-Concrete
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
O. Al-Araidah, A. Momani, N. AlBashabsheh, N. Mandahawi
and R. H. Fouad
© 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
163-173 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
The paper presents a model for costing production and transportation of ready-mix-concrete (RMC) based on type of the mix
and customer site information |
| |
Keywords
Activity-based costing (ABC); Activity-based management (ABM); Ready mix concrete (RMC)
|
|
|
| |
|
Optimal Controller Design Algorithm For Non-Affine
in Input
Discrete-Time Nonlinear System
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
A. Al-Tamimi © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
155-161 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
Convergence is proven of the value-iteration-based algorithm to find the optimal controller in the case of general non-affine
in input nonlinear systems. |
| |
Keywords
Optimal control; Adaptive critics; Approximate dynamic programming; Hamilton Jacobi Bellman; Value iteration; Policy iteration
|
|
|
| |
|
An Experimental Study on the Solubility of a
Diesel-Ethanol Blend
and on the Performance of a Diesel Engine Fueled
with Diesel-
Biodiesel - Ethanol Blends
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
M. Al-Hassan,H. Mujafet
and M. Al-Shannag © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
147-153 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
The phase stability of DE and DBE blends at different component concentrations, as well as the effects of using DBE blends
including ethanol of various proportions on a CI engine performance are experimentally investigated. |
| |
Keywords
Ethanol; Biodiesel; Fuel Blends; Solubility; Engine Performance
|
|
|
| |
|
Analysis of Hoisting Electric Drive Systems in
Braking Modes
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
K. A. Khandakji © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
141-145 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
Braking in hoisting drives is used to reduce the speed of the load (cargo) or to stop it completely. Braking can be realized
using electrical and mechanical means; mechanical brake is used to hold the suspended cargo after disconnecting the driving
motor from the supply |
| |
Keywords
Hoisting drives; Braking mode; Dynamic loads; Induction motor
|
|
|
| |
|
A Statistical Analysis of Wind Power Density Based
on the Weibull
and Ralyeigh models of "Penjwen Region" Sulaimani/
Iraq
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
S. A. Ahmed
and H. O. Mahammed © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
135-140 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
In the present study wind power density of the Penjwen region have been statistically analyzed during the period from
January 2001 to December 2003 based on the monthly measured mean wind speed data. |
| |
Keywords
Mean wind speed; Weibull and Rayleigh distribution functions; Wind power density
|
|
|
| |
|
Polyvinyl Butyral (PVB) and Ethyl Vinyl Acetate
(EVA) as a Binding
Material for Laminated Glass
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
O. Alsaed and I. S. Jalham © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
127-133 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
The effect of the type of the bonding interlayer on the mechanical behavior of laminated glass was studied in this paper.
Furthermore, this investigation presents mathematical models that helps in predicting this behavior based on the glass plate
thickness and the type and thickness of the bonding material. |
|
|
| |
|
Steering Rod Fatigue Test Bench Cam Loading
Analysis
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
Zhong-xing Yang and Yun-fei Mai
© 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
119-126 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
Steering rods are subject to variety kinds of loads which will eventually cause failure. Automobile manufacturers and
engineers are seeking ways to test the fatigue life of the steering rods. |
| |
Keywords
Steering rod fatigue test; Dimensionless dynamic equation; Prime/residual vibration; Inertia load; Virtual prototyping
|
|
|
| |
|
Prospects and Challenges of Small Hydropower
Development in
Jordan
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
J.O. Jaber © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 2
|
|
| |
views |
Bibliometrics | Look Inside
|
110-118 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
Jordans energy balance is largely dominated by combustible fuels. However, the country is well endowed with solar, wind
and oil shale resources, in addition to large and small-scale hydropower projects. |
| |
Keywords
Small hydropower; Pumped storage; Power generation; Renewable energy; GHG emission; Jordan
|
|
|
| |
|
An Application of Customized Lean Six Sigma to
Enhance
Productivity at a Paper Manufacturing Company
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
Nabeel Mandahawia, Rami H. Fouad and Suleiman Obeidata
© 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 1
|
|
| |
views |
Bibliometrics | Look Inside
|
103-109 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
This article presents a process improvement study applied at a local paper manufacturing company based on customized Lean
Six Sigma methodologies. More specifically, the DMAIC (Define, Measure, Analyze, Improve, and Control) project
management methodology and various lean tools are utilized to streamline processes and enhance productivity. |
| |
Keywords
Six Sigma; DMAIC; Lean manufacturing; Overall Equipment Effectiveness; Paper manufacturing
|
|
|
| |
|
Perspectives in Reverse Supply Chain
Management(R-SCM): A State
of the Art Literature Review
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
Arvind Jayant, P. Guptaa
and S.K.Gargb © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 1
|
|
| |
views |
Bibliometrics | Look Inside
|
87-102 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
Environmental and economic issues have significant impacts on reverse supply chain management and are thought to form
one of the developmental cornerstones of sustainable supply chains. |
| |
Keywords
Reverse supply chain management; Remanufacturing; Recycling; Reverse logistics
|
|
|
| |
|
Activity-Based Cost Estimation Model for Foundry
Systems
Producing Steel Castings
| Get Access |
X Close
|
|
|
|
|
To get the full access,
Please subscribe with UDLpro
|
|
|
For further details about subscription plans, please contact us at
info@udltheses.com
|
By
Mohammad D. Al-Tahat
and Al-Refaie Abbas © 2012. Hashemite University
Jordan Journal of Mechanical and Industrial Engineering, Volume 6, Issue 1
|
|
| |
views |
Bibliometrics | Look Inside
|
75-86 Page(s) |
Add to Bookshelf
|
[+]
|
|
| |
Abstract
|
| |
Attention in this work is directed to estimate the manufacturing costs by using Activity-Based Costing (ABC) method for the
castings that are produced by steel foundry. |
| |
Keywords
ABC; Manufacturing cost; Foundry cost; Activity-based management; Casting technology.
|
|
|
